One of the biggest problems with diving or other water sports such as kayaking or surfing is the maintenance of body temperature in cold water. Without some kind of isolation most compatible water sea or lake water will quickly heat your body right. The traditional wetsuit has served this purpose very well for many years and still works effectively in many hard water environments.

Wetsuits normally made of thick neoprene rubber. Usually, vary in thickness from 3 mm to 9.5 mm for you to get an idea of what they are thick. As the name implies, these suits are waterproof and as a result, your skin will in contact with water all the time. The work is adapted to capture a relatively thin layer of water against his skin, which is warmed by the body. The idea is to keep this layer of constant water and not to clean with fresh water. This requires that the suit fit tightly against the body, without air pockets and gaps. If there are gaps or wetsuit fit not only plan the motion of his body in the water will end up pushing the closure of hot water to skin out and the introduction of cold water instead, which of course defeats the purpose of keep the body warm. A dress properly fit is actually quite uncomfortable and difficult to breathe because of this tight fit. But as long as you maintain This tight fit the thickness of the neoprene acts as insulation to keep you and the layer of water on hot skin. Thicker suits are for use in colder waters. For example, costumes of 9.5 mm thick, are for use in water that is 35 to 65 degrees Fahrenheit and 3 mm thick for water from 70 to 85 degrees. Another drawback with the traditional dress is once you leave the water will continue to get colder because the water in the suit begins to evaporate and throw your body heat out of it. The way to warm up after a dive in a wetsuit requires taking off the suit, towel and get some warm cloths on.

To help to combat some of these problems developed waterproof. As the name suggests these dive suits are waterproof and designed to keep the ocean and lake water demand. This does not mean not start sweating if you overheat them, but keep water out of the ocean does not allow for greater flexibility in isolation and temperature control is concerned. Most dry suits are relatively thin compared with wetsuits and usually depend on the underwear to provide isolation unlike wetsuits who make only isolation from the wetsuit itself. One of the most popular materials used to make raincoats called trilaminate. This consists of 3 layers of material, a thin layer of water resistant nylon on the inside and outside with a thin layer of rubber in the center. Of course, technology waterproof making it possible requires that all seals and fully waterproof zippers so a dry suit is tight fit in the wrists and neck, for example, but in general are more comfortable waterproof compared to wetsuits.

Michael Russell Your Independent guide to Wetsuit

O’Neill Epic Wetsuit