It's amazing to look back over the years and see exactly how many windows have increased in price boat. In my own boat I made all plywood frames and Lexan but not some areas that you can always do with a little more light and I am sure that always applies to most boats. I had a look at some of the prisms glass and metal, the other day in an antique pieces and almost fell when I saw them at a price of about two hundred dollars each!

RESINS

One of the main problems with clear molding panels in Australia is the difficulty of dealing with Ultra Violet discoloration of resins. To overcome this we have resins and hardeners used with a resistance to UV degradation. This is done by replacing some of the content of styrene with methyl methacrylate. This is known methacrylate resin as a resin or light stabilized. Before attempting any part of this project clear the details with your resin supplier to be sure you put in the right path to brand names and materials. The resin is used matches as close as possible to the refractive qualities of glass.

In the right pane.

The crystal side of things can be addressed through the use of powder bonded chopped glass mesh chapter, but emulsion-mat bond also be used for translucent panels. The technique for producing clear flat panels is not as difficult as you might think, but some criteria are needed. First of all, cleanliness is essential, a flat / slab, ie, a solid bench to work level, in part, no!

WHAT Do we need?

à ~ A smooth and shiny surface of flat glass, ie the new chipboard (shiny side up) 6 inches larger that the panel is required, two of rest.

Glassware à ~ 1.5 oz (450 g / m 2) for supporting panels, one piece of 2 oz (600 g / m 2) can use. For a larger panel heavy, two pieces of 1.5 oz (450 g / m 2) can be used.

à ~ Some new sheet of cellophane or polyethylene.

à ~ methacrylate polyester resin / resin light stabilized and the catalyst.

à ~ glass roller and roller normal (no fluff, good quality).

TRANSLUCENT COLOR SHEETS.

If you want your group to be of color or color, to mix the pigments in the resin before application. Things only use the color paste is translucent. Paste opaque color pigments should not be used.

WHAT WE DO

à ~ Lay your motherboard (surface shiny side up).

à ~ Lay out sheet of cellophane (or plastic) tape flat, wrinkle free.

à ~ Cut your required size glass panel of glass fiber mat (to ensure the carpet is smaller than the base areas).

à ~ Mix up your resin (with or without translucent color pasta).

à ~ Apply generous amount of resin with a hairbrush for free. Resolve all air bubbles.

à ~ second sheet Economy cellophane (or plastic) on top of the mesh of glass and resin.

à ~ To slow down, to display all the bubbles.

à ~ Take the second sheet of hardboard shiny or glass (safety glass, please) was on the second sheet of cellophane (or polythene) as Â'sandwichÂ.

à ~ Roller carefully all

à ~ Allow to cure and harden glass

Peel à ~ cellophane (or polythene), near of the cured panel.

à ~ The panel can be cut square or shaped like a jigsaw with a metal cutting blade (fine toothed, low speed), after complete healing.

USES AND APPLICATIONS!

These lightweight, tough clear panels are virtually unbreakable and ideal for areas where security is paramount. A garden shed is just an application, hatches or panels of light on the boats is another. Color panels can be made for glass affects Â'stained "translucent colors are very nice on the ships. Other uses are heat resistant mats and tables and real applications here are limited only by his own imagination. Wait, I just think another …. Shower Screens! IÂ'm sure the thought more than enough for spring mind!

NOTE: To view some photos accompanying this article will wwwdolphinboatplans.com and follow the links.

Textured surfaces

This is, of course, surface textures can also come to mind. You can incorporate plastic panels since their original molds texture, provided that the textures allow faithful reproduction through the cellophane (or plastic). You can even make several panels of different colored pigments, cuts and forms the adhesive, lead castings to make a not very attractive leaded glass lighting panels inside cabinets. Experimentation is recommended here and there results guaranteed!

If you enjoyed this article and would like to read more, or even get Terry to write a article for your website or magazine will to http://www.dolphinboatplans.com or rel = "nofollow" href = "http://www.ezinearticles.com"> http://www.ezinearticles.com

Terry Buddell is a freelance journalist and a Marine surveyor, boat designer and shipwright, He lives on board his yacht “The Nicky J Miller’ that he built himself on The Gold Coast Australia and has sailed his yacht up the East Coast to the beautiful Whitsunday Islands. He is currently resident in Gladstone Queensland where he is building another boat for his collection of plans for sale on the internet.In his spare time(what??) Terry is also building a Weissenborn lap steel guitar!

Terry can be contacted on arcus1@bigpond.com or

http://www.dolphinboatplans.com

2004 Olympics – pictures of the games – sprint kayaking